Lamination polyesters
Aropol M105 TB
AROPOL M 105 is an unsatisfied polyester resin based on orthophtalic acid. Its styrene emission is 50% less than customary resins; the emission is only 2-5% of the total weight of the resin, whereas the standard types has 5-10%. The product has good glass fiber wetting ability and is easy to process.
AROPOL M 105 TB is a thixotropic, pre-accelerated resin applicable for spray-up molding and by hand-lamination. It has a semi-long gelling time and its curing properties makes it possible to produce 2-10 mm thick laminates. AROPOL M 105 TB is suitable for processing of different reinforced plastics and is especially recommended for boat manufacturing.
Geltime (23 °C): 1% hardener – 40 min
Package sizes: 1kg, 3kg, 10kg, 20kg
Documentation: Aropol M105 TB EG
Casting resins
Polylite 32032-20
POLYLITE® 32032-20 is a water-white, clear casting resin designed for applications in which extreme clarity and
absence of colour are required. Castings made with Polylite 32032-20 have the same refractive index as glass. Suggested applications include decorative castings, tabletops and biological encapsulations. The product is a preaccelerated, UV stabilised orthophthalic polyester, with a low viscosity and low
reactivity. Polylite 32032-20 contains methyl methacrylate to enhance weather resistance.
Properties:
– low viscosity
– refractive index of glass
– resistance to weathering
– outstanding air release
– short gel and cure times
Geltime (25 °C): 1,25% hardener – 18-30 min
Package sizes: 1kg, 3kg, 10kg, 20kg
Documentation: POLYLITE 32032-20 EN
Hardener
Methyl ethyl ketone peroxide (MEKP)
Package sizes: 25ml, 100 ml, 250ml, 5kg
Documentation: Data sheet(pdf)
